Step 19 of 27
After that, flatten the vine design by lightly hammering it on the base metal plate (fig. 19a, 19b).
Then, position the vine back on your pendant (fig. 19c, 19d).
Lastly, use a 26 gauge gold copper wire to bond the vine design onto the primary wire frame (fig. 19e, 19f).
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Step 20 of 27
Now, let’s work on the left side of the pendant detailing wire structure.
Make a curved wire design with an offset at the end (fig. 20a).
Then, anchor the loose wire onto the primary wire frame (fig. 20b, 20c, 20d).
Step 21 of 27
At your pendant front, make two medium coils with stepped bail making pliers (fig. 21a, 21b, 21c, 21d).
Similarly, curve the wire downwards and make a big vine design (fig. 21e, 21f, 21g).
Then, cut off the excess wire (fig. 21h, 21i).
Step 22 of 27
Lastly, flatten the vine design and bond it onto the primary wire frame with a string of 26 gauge gold copper wire (fig. 22a, 22b, 22c, 22d, 22e).
Checkpoint: You have completed the first layer of your pendant detailing (fig. 22f, 22g, 22h).