Step 16 of 27
Next, anchor the right loose 18 gauge wires onto the top right side of your primary wire frame with 2 coils (fig. 16a, 16b, 16c).
Then, cut off the excess wire (fig. 16d, 16e).
Repeat the same anchoring process on the top left side of your primary wire frame (fig. 16f, 16g, 16h, 16i, 16j, 16k).
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Step 17 of 27
Welcome to the part where you add the first layer to pendant detailing.
With a new string of 18 gauge gold copper wire, make a sharp tip that matches the bottom of your primary wire structure (fig. 17a).
Then, make a small curve on the right loose wire with your thumb, and follow by an offset bend as shown (fig. 17b, 17c, 17d).
Lastly, anchor the loose right wire on the primary wire frame right under the first anchor point (fig. 17e, 17f).
Step 18 of 27
Continue from the previous step, flip your pendant to the front (fig. 18a).
Make two medium coils with your stepped bail making pliers (fig. 18b, 18c, 18d).
Then, curve your wire towards the bottom frame and make one big coil design as shown (fig. 18e, 18f, 18g, 18h).
Trim off the excess wire and you will have a beautiful vine design (fig. 18i, 18j).