Step 12 of 21
Moving on, let’s add a second ring frame to your pendant design.
Make a ring frame using a wooden ring mandrel and a 22-gauge copper wire (fig. 12a, 12b, 12c).
Place the second ring frame on the front of the lower half of your pendant, and tuck the ring ends to the back as shown (fig. 12d, 12e, 12f, 12g).
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Then, make a sharp bend on the ring ends with a chain nose pliers and pull them to the front (fig. 12h, 12i, 12j, 12k, 12l).
Prefer this wire-wrapping tutorial in a PRINTABLE FORMAT? (High Resolution Photos)
Click here for the PDF version of “Wire-Wrapping Beautiful Hexagonal Crystal Point Pendant Tutorial”
Step 13 of 21
Line the wire ring ends across the surface of your crystal point (fig. 13a, 13b, 13c).
Then, bend the extra wires downwards (fig. 13d, 13e).
Secure the secondary ring frame with a 26-gauge copper wire (fig. 13f, 13g, 13h, 13i).
Step 14 of 21
Continue from Step 11, pull the remaining 22-gauge copper wires to the pendant front, wrapping through the intersecting ring frames as shown:
- Left 22-gauge copper wire (fig. 14a, 14b, 14c).
- Right 22-gauge copper wire (fig. 14d, 14e, 14f).
Then, fill the ring space with U-shape curls on the 22-guage copper wires (fig. 14g, 14h, 14i).
Anchor the wires on the ring frame and trim off the excess wires (fig. 14j, 14k).
