Wire-Wrapping Beautiful Hexagonal Crystal Point Pendant Tutorial

Hi there my dear wire wrapper!

Looking to show off your precious crystal point and carry it around with you?

There are no better way than to wear it as a pendant necklace.

You can DIY this jewelry in my Wire-Wrapping Beautiful Hexagonal Crystal Point Pendant Tutorial.

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

SEND GUIDE TO EMAIL

We respect your privacy. Unsubscribe at anytime.

Don’t be intimidated by the complex design of this pendant piece.

I will guide you through step-by-step with my simple instructions and detailed progress pictures.

Patience is key. Happy wrapping!

LEVEL: ADVANCED

MATERIALS + TOOL

• Copper Wire (18 AWG)
• Copper Wire (22 AWG)
• Copper Wire (26 AWG)
• Light Blue Crystal
• Crystal Hexagonal Wand Stone
• Wire Cutter
• Chain Nose Pliers
• Nylon Jaw Pliers
• Round Nose Pliers
• Stepped Bail-Making Pliers
• Wood Ring Mandrel Masking Tape
• Metal Base Plate
• Ball Peen Hammer Two-sided Flat/Round Head
• Finest Steel Wire Wool

WIRE-WRAPPING BEAUTIFUL HEXAGONAL CRYSTAL POINT PENDANT TUTORIAL

Step 1 of 21

Equip your work table with items from the Materials and Tool list (fig. 1a).

Firstly, let’s make a main frame to hold your Crystal Hexagonal Wand Stone.

Tape a string of 18-gauge copper wire on the left side of your crystal (fig. 1b, 1c, 1d, 1e).

Then wrap the wire over the bottom to the right side of your crystal (fig. 1f, 1g). 

Step 2 of 21

Next, wrap the top of your crystal with the remaining 18-gauge copper wire (fig. 2a, 2b).

Then, bend the extra wires into straight lines using a chain nose pliers (fig. 2c, 2d, 2e).

Take a string of 26-gauge copper wire and coil the wire frame to a close (fig. 2f, 2g, 2h).

Step 3 of 21

Secondly, let’s form a round crystal holder on the top your crystal point frame.

Split the 18-gauge copper wires into a V-shape (fig. 3a).

Then, form semi-circle curls on both wires with a stepped bail-making pliers and chain nose pliers (fig. 3b, 3c, 3d, 3e, 3f). 

Step 4 of 21

After that, make a small spiral crystal seating with 18-gauge copper wire, round nose pliers and nylon jaw pliers (fig. 4a, 4b, 4c).

Then, assemble your round crystal with its frame and seating as shown (fig. 4d, 4e, 4f, 4g).