Step 7 of 15
Moving on, anchor the secondary gemstone wire frame onto the 10-gauge main frame.
On the left side loose 18-gauge copper wire, wrap 3 loops onto the main frame (fig. 7a, 7b, 7c, 7d).
Then, cut off the excess wire with a wire cutter (fig. 7e, 7f).
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Repeat the same process for the right side loose copper wire (fig. 7g, 7h, 7i, 7j, 7k, 7l).
Step 8 of 15
From this step onwards, we will be making the beautiful minimal winding design on the circular pendant.
Back to the first gemstone frame wire, curve the right side loose 18-gauge wire to the bottom right side of the 10-gauge main frame (fig. 8a, 8b).
End the first wire curve with a coil at the bottom right side of the main frame as shown (fig. 8c, 8d, 8e).
Then, make a second wire curve by pulling the loose copper wire upwards and make a coil (fig. 8f, 8g, 8h, 8i, 8j).
Make a third wire curve to a point slightly lower on the bottom right side of the main frame as shown (fig. 8k, 8l, 8m).
After making a coil on the main frame, use a stepped bail making pliers to make a small loop design (fig. 8n, 8o, 8p).
Finish up the right side circular artisan pendant design by coiling the loose wire next to the first coil point (fig. 8r, 8s, 8t).
Step 9 of 15
Similarly, repeat the same wire structuring design on the left side of your circular artisan brown gemstone pendant:
Bend the loose 18-gauge copper wire and curve from top left point of the pendant main frame towards bottom left point and make a coil (fig. 9a, 9b, 9c).
Then, curve the loose back up to the top left point of the main frame and make a coil (fig. 9d, 9e, 9f).
On the third curve, make a coil slightly lower from the previous bottom left coil (fig. 9g, 9h, 9i, 9j).
Lastly, use a stepped bail-making pliers to make a small loop design and finish with a coil on the main frame as shown (fig. 9k, 9l, 9m, 9n).
