Step 18 of 22
Slip a 26-gauge gold copper wire under your gemstone and wrap two coils on the left Anchor arm as shown (fig. 18a, 18b, 18c).
Next, slide in your white bead from the other loose wire end (fig. 18d).
Place the white bead in position and make a wrap around the Shank to hold it (fig. 18e, 18f, 18g, 18h, 18i).
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Step 19 of 22
Next, wrap the remaining 26-gauge wire for three coils around the white bead (fig. 19a, 19b, 19c, 19d, 19e).
Then, pull the excess wire to the back of your pendant through the right side of the Anchor Arm (fig. 19f, 19g).
Make two wraps on the Arm (fig. 19h).
Pull the excess wires to the left and trim off with a wire cutter (fig. 19i, 19j, 19k, 19l, 19m, 19n).
Your gemstone piece attachment is complete.