Step 16 of 22
Let’s use a creative way to secure the top part of your gemstone piece.
Prepare two long strains of 22-gauge gold copper wire (fig. 16a).
Use a nylon jaw pliers to twist the wires into a rope (fig. 16b,16c).
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Curve the rope where you can find its midpoint and place it behind your pendant cross (fig. 16d).
On the cross, make one wrap on the top part, two wraps on the right part, and one wrap on the bottom part with the wire rope (fig. 16e, 16f, 16g, 16h).
After that, pull the wire rope along the left side of your gemstone until you reach the bottom (fig. 16i, 16j).
Then, make a diagonal wrap at the back of the Anchor Arm (fig. 16k).
Lastly, wrap the remaining wire rope along the left side of your Anchor Arm (fig. 16l, 16m, 16n).
Step 17 of 22
On the other loose wire rope, make two wraps on the left part your pendant cross (fig. 17a, 17b).
Then, pull the wire rope along the right side of your gemstone until the bottom (fig. 17c, 17d, 17e).
Make a diagonal wrap at the back of the Anchor Arm and proceed to wrap the remaining wire rope along the right Arm (fig. 17f, 17g, 17h, 17i).