Wire-Wrapping Whimsical Woven Two Tree Handmade Pendant Tutorial

Step 11 of 15

Now, let’s have fun with beads and wire swirls on your front pendant frame.

Take a 20-gauge copper wire and slip in one golden spacer bead (fig. 11a, 11b, 11c).

Make a loop around the bead to hold it and place the bead at the tip of your 16-gauge main frame (fig. 11d, 11e).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

SEND GUIDE TO EMAIL

We respect your privacy. Unsubscribe at anytime.

Anchor the 20-gauge copper wire with a coil, and repeat the process for the second and third golden spacer beads on the right  (fig. 11f, 11g).

Continue with the fourth and fifth golden spacer beads on the left side of your main frame as shown (fig. 11h).

Step 12 of 15

Now, let’s add some silver spacer beads into the design (fig. 12a).

On the right loose 20-gauge copper wire, slip in 3 silver spacer beads and 1 golden spacer bead (fig. 12b, 12c).

Then, make a coil on the 16-gauge main frame and form a double wire loop  (fig. 12d, 12e, 12f).

Add a sixth bead in a loop design onto the top right frame (fig. 12g, 12h, 12i).

After that, make a medium spiral flower and slip in 3 golden spacer beads (fig. 12j, 12k).

Anchor the extra 20-gauge copper wire onto the back of the wire bail (fig. 12l, 12m).

Step 13 of 15

Duplicate the design process on the left frame (fig. 13a):

• Slip in 3 silver spacer beads and 1 golden spacer bead onto the left loose 20-gauge copper wire (fig. 13b).
• Form a coil and a double wire loop (fig. 13c, 13d).
• Then, add the seventh bead in a loop design and a medium spiral flower at the top left frame (fig. 13e, 13f).
• Lastly, slip in 3 silver spacer beads and anchor the extra 20-gauge copper wire on the front of the wire bail (fig. 13g, 13h).