Step 11 of 16
Now let’s add beautiful vine and spiral details onto your pendant main frame to elevate its design.
Facing the front of your pendant, pull the right loose 18-gauge wire bundle to the bottom left (fig. 11a, 11b).
Then, we will focus on designing with the left loose 18-gauge wire bundle.
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Firstly, make a small loop on the top of your pendant bail (fig. 11c, 11d, 11e, 11f).
Next, make a second small loop on the neck of your pendant bail with a stepped bail-making pliers (fig. 11g, 11h, 11i).
Lastly, pull the remaining wire bundle along the right side of your stone and wrap it through the back as shown (fig. 11j, 11k, 11l).
Prefer this wire-wrapping tutorial in a PRINTABLE FORMAT? (High Resolution Photos)
Click here for the PDF version of “Wire-Wrapping Jumbo Double Labradorite Stone Pendant Tutorial”
Step 12 of 16
Continue on, wrap the remaining wire to the front of your pendant (fig. 12a, 12b).
Make the third loop design at the bottom frame with a stepped bail-making pliers (fig. 12c, 12d).
Then, wrap the excess wires tightly at the middle stem with a long needle nose pliers (fig. 12e, 12f, 12g, 12h).
Get creative with the excess wire by curling it into a tiny vine using a round nose pliers (fig. 12i, 12j, 12k, 12l).
Your upper pendant detailing is complete.
Step 13 of 16
Moving on, use the other loose wire bundle on your left and make a winding vine design on the left side of your upper pendant frame (fig. 13a, 13b, 13c, 13d).
Then, pull your winding vine towards the pendant middle stem (fig. 13e, 13f, 13g).
Next, make 3 wraps on the top of lower pendant frame (fig. 13h, 13i, 13j, 13k, 13l, 13m).
