Step 10 of 28 – Design 4 (part 2/2)
The design here is different.
Instead of coiling the stone, loop the wire over the frame direct then anchor. (fig. 10a, 10b, 10c, 10d)
Clear the excess wire with wire cutter (fig. 10e, 10f).
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Step 11 of 28 – Design 5 (part 1/2)
Similarly, start a new strand of 22 gauge wire, loop it through the donut hole and anchor on wire frame (fig. 11a, 11b, 11c, 11d, 11e, 11f)
Snip off excess wire (fig. 11g).
Step 12 of 28 – Design 5 (part 2/2)
Proceed looping the donut stone, anchor the wire frame and wrap until the end (fig. 12a,12b,12c,12d,12e).
Use a nylon jaw pliers to pull the wire if it is too short for your fingers to hold (fig. 12f, 12g).