Step 4 of 28 – Design 2 (part 1/2)
Start a new 22 gauge wire and make a few wraps to secure it on the frame as shown (fig. 4a)
Then, coil the wire through the middle of the donut stone (fig. 4b).
Begin coiling a simple design on the stone only as shown (fig. 4c, 4d, 4e, 4f, 4g, 4h, 4i, 4j).
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Finish up the design with a big coil on the frame (fig. 4k, 4l, 4m).
Step 5 of 28 – Design 2 (part 2/2)
Coil the remaining wire onto the frame only (fig. 5a, 5b, 5c, 5d).
Snip off the excess wire with a wire cutter (fig. 5e, 5f).
Step 6 of 28 – Design 3 (part 1/3)
Start a new strand of 22 gauge wire, loop through the donut hole and anchor on the wire frame (fig. 6a, 6b, 6c, 6d, 6e)
Snip off the excess wire, and pull the other end of the wire towards the frame (fig. 6f, 6g).