Step 13 of 16
Lastly, anchor the naked gold and silver copper wires onto the left bail frame (fig. 13a, 13b, 13c, 13d).
Trim off the excess wires using a wire cutter (fig. 13e, 13f).
Secure the anchor point with a chain nose pliers (fig. 13g, 13h).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Prefer this wire-wrapping tutorial in a PRINTABLE FORMAT? (High Resolution Photos)
Step 14 of 16
Moving on, let’s work on the remaining wire bundle.
Twist the left wire bundle to the right side of your pendant (fig. 14a, 14b).
Then, slip the naked gold and silver copper wires through the center bail gap (fig. 14c, 14d, 14e, 14f, 14g).
Anchor the gold and silver wires onto the right bail frame and trim off the excess wires (fig. 14h, 14i).
Use a chain nose pliers to secure the anchor point (fig. 14j, 14k).




















