Wire-Wrapping Blue Marble Sphere Ball Abstract Swirl Pendant Tutorial

Step 4 of 16

Moving on, make an alternating double-coil weave on the 18-gauge wire bail with a 22-gauge silver copper wire (fig. 4a).

Start with two coils on the right bail wires, and then alternate on the opposite side (fig. 4b, 4c).

Continue weaving until you reach the end point of your wire bail (fig. 4d, 4e).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

SEND GUIDE TO EMAIL

We respect your privacy. Unsubscribe at anytime.

After that, trim off the excess 22-gauge weaving wire using a wire cutter (fig. 4f, 4g, 4h, 4i).

Step 5 of 16

On the back side, take a 20-gauge gold copper wire and anchor it below the right woven bail frame (fig. 5a, 5b).

Repeat the process on the left woven bail frame with the second 20-gauge gold copper wire (fig. 5c, 5d).

Step 6 of 16

Now, let’s design the 18-gauge marble wire frame (fig. 6a).

Suspend the marble at the center frame and tape it (fig. 6b, 6c, 6d).

Then, pinch the bottom and top of the wire frame to form a rounded marble wire frame (fig. 6e, 6f, 6g, 6h).