Wire-Wrapping Blue Marble Sphere Ball Abstract Swirl Pendant Tutorial

Step 9 of 16

Finish the marble pendant frame design by coiling the two main frames together with a 26-gauge silver copper wire:

• Left coiling point (fig. 9a, 9b, 9c).
• Right coiling point (fig. 9d, 9e).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

SEND GUIDE TO EMAIL

We respect your privacy. Unsubscribe at anytime.

Step 10 of 16

Next, let’s add design onto your pendant bail.

Split the remaining bail wires to the side (fig. 10a, 10b).

Then, take a new 22-gauge silver copper wire and coil along the middle 18-gauge silver bail wire as shown (fig. 10c, 10d).

Repeat the wire coiling process on the opposite side (fig. 10e, 10f).

Step 11 of 16

After that, cross-wrap the wire bundles at the front bail neck (fig. 11a, 11b, 11c, 11d).

On the right wire bundle, keep the naked gold and silver copper wires in place (fig. 11e).

Then, twist the coiled silver copper wire to the back bail neck as shown (fig. 11f, 11g).

Step 12 of 16

Continue on, twist the naked gold and silver copper wires towards the front bail neck (fig. 12a, 12b).

Then, wrap around the left half of the bail neck (fig. 12c, 12d, 12e).

Slip the remaining wires out to the front through the center gap of the bail neck (fig. 12f, 12g, 12h).