Wire-Wrapping Woven Hummingbird With Ornate Beads Pendant Tutorial

Step 8 of 16

After that, place the second wing frame on the top of the first wing frame (fig. 8a).

Make a spiral at the bird breast area using the loose upper wing frame wire (fig. 8b, 8c, 8d, 8e).

Then, wrap one yellow crystal bead inside the breast frame, and finish the design with a wire curl (fig. 8f, 8g, 8h, 8i, 8j).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

SEND GUIDE TO EMAIL

We respect your privacy. Unsubscribe at anytime.

Step 9 of 16

Use the loose lower wing frame wire to design the back side of the pendant with wire loop and curves (fig. 9a, 9b, 9c).

Step 10 of 16

On the front side, pull the bottom remaining 22 gauge copper wire along the body frame (fig. 10a, 10b).

Take a new 26 gauge copper wire and continue weaving the bottom bird body frame (fig. 10c, 10d, 10e, 10f).

Then, form a bird leg frame by looping the extra 22 gauge copper wire (fig. 10g, 10h).

Trim off at the center of the wire loop to finish the design (fig. 10i, 10j).