Studio 73 Designs

Wire Jewelry Making & Wire Wrapping Techniques

Join PREMIUM MEMBERSHIP (FREE-TRIAL): 70+ Wire Wrapping Tutorials: Gain access to ALL step-by-step tutorials with high-quality images, no ads, plus all future tutorials. Check it out HERE.

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial

by

Step 7 of 10

Moving on, place a tear drop diamond in between the bail with its tip pointing down (fig. 7a, 7b).

Wrap the 18-gauge copper wire to frame the teardrop diamond (fig. 7c, 7d).

Then, take a new 26-gauge copper wire and make a figure-8 weave across the naked 20-gauge bail wires (fig. 7e).

wire wrap jewelry

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

We respect your privacy. Unsubscribe at anytime.

On the right bail, start with two single coils on the right base wire and middle base wire (fig. 7f).

Pull the 26-gauge weaving wire across the bail space and continue wrapping two single coils on the left bail (fig. 7g, 7h).

Weave along the bail until you reach the top of the diamond wire frame (fig. 7i).

Place the teardrop diamond into the wire frame (fig. 7j).

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 49
fig. 7a

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 50
fig. 7b

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 51
fig. 7c

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 52
fig. 7d

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 53
fig. 7e

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 54
fig. 7f

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 55
fig. 7g

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 56
fig. 7h

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 57
fig. 7i

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 58
fig. 7j

Step 8 of 10

Continue weaving until your reach the bail top (fig. 8a, 8b).

At the pendant back, anchor the loose bottom left wire bundle onto the 18-gauge bail neck and trim off the excess wires (fig. 8c, 8d, 8e).

Repeat the anchoring process on the loose bottom right wire bundle (fig. 8f, 8g).

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 59
fig. 8a

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 60
fig. 8b

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 61
fig. 8c

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 62
fig. 8d

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 63
fig. 8e

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 64
fig. 8f

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 65
fig. 8g

Step 9 of 10

Similarly, anchor the loose top right loose 20-gauge wire bundle onto the 18-gauge bail neck (fig. 9a, 9b).

Repeat the anchoring process for the loose top left 20-gauge wire bundle as well (fig. 9c, 9d).

Your diamond weave bail is complete (fig. 9e, 9f).

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 66
fig. 9a

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 67
fig. 9b

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 68
fig. 9c

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 69
fig. 9d

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 70
fig. 9e

Wire-Wrapping Shark Tooth With Diamond Weave Bail Pendant Tutorial 71
fig. 9f