Studio 73 Designs

Wire Jewelry Making & Wire Wrapping Techniques

Join PREMIUM MEMBERSHIP (FREE-TRIAL): 70+ Wire Wrapping Tutorials: Gain access to ALL step-by-step tutorials with high-quality images, no ads, plus all future tutorials. Check it out HERE.

Wire-Wrapping Red Oval Shape Pendant Tutorials

by

Step 6 of 9

A continuation from step 5, pull the length of copper wire to the front side of the pendant (fig. 6a).

Then, make a design curve at the lower half of the pendant and tug the wire under the oval gemstone as shown (fig. 6b).

Lastly, secure the length of wire at the back side of the pendant by pulling it towards the top corner of the back frame (fig. 6c, 6d).

wire wrap jewelry

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

We respect your privacy. Unsubscribe at anytime.

Use a wire cutter to snip off excess wire after anchoring (fig. 6e).

Wire-Wrapping Red Oval Shape Pendant Tutorials
fig. 6a

Wire-Wrapping Red Oval Shape Pendant Tutorials
fig. 6b

Wire-Wrapping Red Oval Shape Pendant Tutorials
fig. 6c

Wire-Wrapping Red Oval Shape Pendant Tutorials
fig. 6d

Wire-Wrapping Red Oval Shape Pendant Tutorials
fig. 6e

Step 7 of 9

Similarly, begin weaving the vine on the top corner with a new 26 gauge wire (fig. 7a). Start on the back frame only and progressively move towards the end of the vine (fig. 7b, 7c).

Wire-Wrapping Red Oval Shape Pendant Tutorials
fig. 7a

Wire-Wrapping Red Oval Shape Pendant Tutorials
fig. 7b

Wire-Wrapping Red Oval Shape Pendant Tutorials
fig. 7c