Wire-Wrapping Radiant Blue Fire Labradorite Sun Pendant Tutorial

Step 12 of 15

Group the back bottom frame and the front bottom frame by coiling them together with a 26-gauge silver copper wire (fig. 12a):

Coil the back bottom frame and a bit to the left (fig. 12b).

Then, make a loop on the bead of the front bottom frame (fig. 12c, 12d, 12e).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

SEND GUIDE TO EMAIL

We respect your privacy. Unsubscribe at anytime.

Lastly, coil the remaining wire to the right half of the back bottom frame (fig. 12f, 12g).

Step 13 of 15

Facing the top of your pendant, trim off the excess 26-gauge silver copper wire with a wire cutter (fig. 13a, 13b, 13c).

Then, loosely coil the remaining 20-gauge copper wire along the 16-gauge back frame and side frames (fig. 13d, 13e):

• Top left frame (fig. 13f).
• Top right frame (fig. 13g).

Step 14 of 15

Seventh and the final part to assemble on your pendant – a small round yellow diamond (fig. 14a).

Take a 20-gauge copper wire and wrap a frame around your diamond (fig. 14b, 14c).

Pull the remaining copper wire into straight lines upwards and fold them to the back (fig. 14d, 14e, 14f).

Then, curve out a swirly back stone holder with wires as shown (fig. 14g, 14h).