Step 3 of 9
Moving on, let’s seal the coiled wire frames.
Bend the right 22-gauge coiled wire on top of your stone to mark the end point of the wire frame (fig. 3a, 3b).
Then, curve the right 26-gauge coiled wire to the left direction (fig. 3c).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Repeat the bending process on the left 22-gauge coiled wire (fig. 3d, 3e).
After that, place the left 26-gauge coiled wire in front of the curved 26-gauge coiled wire (fig. 3f).
Prefer this wire-wrapping tutorial in a PRINTABLE FORMAT? (High Resolution Photos)
Step 4 of 9
Pull the curved 26-gauge coiled wire to the top left of the 22-gauge coiled wire frame (fig. 4a, 4b).
Then, anchor the naked part of the 26-gauge coiled wire onto the naked part of 22-gauge coiled wire frame by coiling as shown (fig. 4c, 4d).
Repeat the coiling process on the opposite side (fig. 4e, 4f, 4g, 4h).
Trim off any excess 22-gauge coiling wire and 26-gauge coiling wire with a wire cutter (fig. 4i, 4j, 4k).


















