Step 4 of 10
Moving on, take a new 26-gauge copper wire and coil the diamond pendant frame (fig. 4a, 4b, 4c).
At the bail end point, pull the 4 remaining loose 18-gauge silver copper wires to the front side (fig. 4d, 4e, 4f).
Leave the 2 remaining loose 20-gauge silver copper wires at the back side (fig. 4g).
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Prefer this wire-wrapping tutorial in a PRINTABLE FORMAT? (High Resolution Photos)
Click here for the PDF version of “Wire-Wrapping Silver Woven Green Aventurine Pendant Tutorial”
Step 5 of 10
Now, let’s design the back stone holder frame.
Bend and line the remaining 20-gauge silver copper wires along the top half of the diamond frame (fig. 5a, 5b).
Then, place a round green aventurine crystal stone at the frame center and tape the front side to hold it in place (fig. 5c, 5d, 5e, 5f).
On the back side, wrap the left loose 20-gauge silver copper wire around the stone and loop the wire end (fig. 5g, 5h, 5i).
Then, repeat the process with the right loose 20-gauge silver copper wire with added loop and swirly designs as shown (fig. 5j).
Step 6 of 10
On the front side, overlap the loose 18-gauge silver copper wires at the bail neck (fig. 6a, 6b).
Then, wrap the wires along the bottom of your stone (fig. 6c, 6d, 6e).
After that, split the wires into four anchor points on the woven diamond pendant frame as shown (fig. 6f, 6g, 6h).
