Wire-Wrapping Silver Cage Gold Swirl Crystal Wand Pendant Tutorial

Step 8 of 13

Moving on, let’s transform the remaining 18-gauge silver copper wires into wire roses (fig. 8a).

Wrap the right outer wire around the bail neck for one round (fig. 8b, 8c, 8d, 8e, 8f).

Leave half inch of wire and curl it into a spiral using a round nose pliers (fig. 8g, 8h, 8i).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

SEND GUIDE TO EMAIL

We respect your privacy. Unsubscribe at anytime.

After that, use the right inner wire to continue curling the spiral (fig. 8j, 8k, 8l, 8m).

Trim off the excess 18-gauge silver wire once you have the desired wire rose size (fig. 8n, 8o).

Step 9 of 13

Repeat the wire rose curling process on the other side of your pendant with the remaining 18-gauge silver wires on the left:

• Left outer wire (fig. 9a, 9b, 9c, 9d).
• Left inner wire (fig. 9e, 9f, 9g).

Step 10 of 13

Part Three, let’s add beautiful gold accent onto your crystal wand pendant (fig. 10a, 10b).

Take a 20-gauge gold copper wire and prepare two strings at the bottom of your pendant as shown (fig. 10c, 10d, 10e).

Then, weave the gold wires onto the pendant bottom frame with 26-gauge silver copper wire (fig. 10f, 10g, 10h).

Step 11 of 13

Face the front of your pendant and work on the left loose 20-gauge gold copper wire (fig. 11a).

Make a curve and line upwards along the right mid frame (fig. 11b, 11c, 11d).

Then, make a loop and pull the remaining wire to the top left frame (fig. 11e, 11f, 11g, 11h).

After that, secure the gold copper wire by coiling them onto the pendant frame with 26-gauge silver copper wire (fig. 11i, 11j, 11k, 11l).