Wire-Wrapping Lavish Heady Teardrop Labradorite Pendant Tutorial

Step 11 of 21

Moving on, separate 3 wires from the left bundle (fig. 11a).

Then, coil up the wires using a 22-gauge silver copper wire for about 3 inches (fig. 11b, 11c, 11d).

After that, wrap the coiled wire around the pendant neck as shown (fig. 11e, 11f, 11g, 11h, 11i).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

SEND GUIDE TO EMAIL

We respect your privacy. Unsubscribe at anytime.

Step 12 of 21

Make a small spiral at the end of the coiled wire to form a wire flower (fig. 12a, 12b, 12c, 12d).

Then, trim off the excess wires with a wire cutter (fig. 12e, 12f).

Finish the design with curls at the tip of the trimmed wire ends using a round nose pliers (fig. 12g, 12h).

Step 13 of 21

Return back to the right bundle and make a small spiral with two 18-gauge wires (fig. 13a, 13b).

Then, trim off the excess 18-gauge wires with a wire cutter (fig. 13c, 13d).

Lastly, curl the trimmed ends with a round nose pliers (fig. 13e, 13f).

Step 14 of 21

Now, let’s work on the right two remaining loose wires (fig. 14a).

Take a string of 22-gauge silver copper wire and loosely coil one string of 18-gauge wire (fig. 14b, 14c).

Then, make two wraps around the pendant bail neck with the 18-gauge wires:

• First wrap (fig. 14d, 14e, 14f, 14g, 14h, 14i)
• Second wrap (fig. 14j, 14k, 14l, 14m).