Wire-Wrapping Coiled Round Labradorite Silver Beaded Pendant Tutorial

Step 9 of 16

Next, repeat the coiling combo from Step 4 on the right 18-gauge wire bundle, leaving out the left inner wire (fig. 9a, 9b).

Then, loop the left inner naked wire along the front and back of the labradorite stone (fig. 9c, 9d, 9e).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

SEND GUIDE TO EMAIL

We respect your privacy. Unsubscribe at anytime.

Step 10 of 16

Similarly, take a new 22-gauge silver copper wire and coil the remaining 18-gauge silver copper wire at the bottom point (fig. 10a, 10b).

Add in 6 silver spacer beads along the coiled wire for extra details (fig. 10c, 10d, 10e).

Line the coiled wire along the left pendant frame (fig. 10f).

After that, pull the extra wire to the back side through the top point (fig. 10g, 10h, 10i, 10j).

Step 11 of 16

At the bottom right frame, curl the center naked 18-gauge base wire into a swirly design (fig. 11a, 11b).

Meanwhile, fold the right outer base wire to the back side (fig. 11c).

Then, connect the two halves of the bottom coiled frame together using excess 22-gauge coiling wire (fig. 11d, 11e, 11f).