Wire-Wrapping Coiled Round Labradorite Silver Beaded Pendant Tutorial

Step 6 of 16

Use the front folded 18-gauge silver copper wire to form a wire swirl design at the bottom frame (fig. 6a, 6b, 6c).

Then, trim off the excess wire (fig. 6d, 6e).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

SEND GUIDE TO EMAIL

We respect your privacy. Unsubscribe at anytime.

Step 7 of 16

Now, line the inner naked 18-gauge silver copper wire around front and back of the labradorite stone (fig. 7a, 7b, 7c).

At the bottom point, coil the remaining wire with a new 22-gauge silver copper wire (fig. 7d, 7e, 7f, 7g).

Add in 3 silver spacer beads along the coiled wire for extra details (fig. 7h, 7i, 7j, 7k).

Step 8 of 16

After that, make a secondary loop frame with the coiled wire on the front side (fig. 8a, 8b, 8c, 8d).

Slip the excess wire through the top point, and to the back side (fig. 8e, 8f, 8g, 8h).

Then, use a chain nose pliers to bend the wire end straight (fig. 8i, 8j).

And finish with a curled end using a round nose pliers (fig. 8k, 8l).