• Skip to main content
  • Skip to secondary menu
  • Skip to primary sidebar
  • Skip to footer
Studio 73 Designs

Studio 73 Designs

Wire Jewelry Making & Wire Wrapping Techniques

  • Start Here!
  • Get Your FREE Wire-Wrapping Guides
  • Shop Tutorials
    • Cart
    • Checkout
  • Blog
  • My Etsy Shop
  • About Me
    • Contact Me

Tools for Wire Wrapping + Supplies [COMPLETE Guide]

DISCLAIMER:  This post may contain affiliate links, meaning I get a commission if you decide to make a purchase through my links, at no cost to you.  Please read my disclaimer for more info.

Want to Support my Work?

If you are enjoying my content, please consider leaving me a tip in my tip jar :). This helps me to create more AMAZING FREE content to share with you :)

August 10, 2022 by Chantal

Are you trying to find tools for wire-wrapping?

If you’re new to the world of wire jewelry making, you may be wondering what kind of jewelry tools and supplies you need so I’ve put together an extensive list to get you started.

I’ve broken down the list into:

  • Basic Tools for wire-wrapping
  • Tools + supplies for wire-wrapping jewelry that are nice to have on hand (not required to start)
  • Tools + supplies for wire jewelry making that you may want down the road
Wire-Wrapping Tools and Supplies for Beginners

Don’t forget to check out my other blog post for more wire-wrapping resources => Wire-Wrapping for Beginners

Looking for simple wire-wrapping techniques?

Click here to see all PRINTABLE wire-wrapping tutorials

Basic Tools for Wire Wrapping + Supplies

You really only need a few basic tools and supplies to get started in wire jewelry making.

Basic Jewelry Tools

When you start working with wire, you’ll need an assortment of small hand jewelry tools….different types of pliers and cutters.

You don’t need to buy expensive jewelry tools to start. When I began the craft, I bought a set like this and I still use all the same tools.

This set is available on Etsy and is PERFECT for starting out.

Photo Credit: biglittleuk

Get it here => Jewelry Making Set

Sets usually have the following tools:

  • Side cutters: To cut your wire
  • Round nose pliers: Has round tapered ends, use for making loops and working with wire.
  • Needle nose pliers: Used for stabilizing the wire while you are working with it.
See More Jewelry Tool Sets

Wire for Wrapping Stones

There is a LOT of choice when it comes to picking what type of wire you want (copper, silver, brass, etc…) but to keep things simple, I would recommend starting with non-tarnishing wire.

RELATED: Jewelry Wire for Wrapping Stones: Beginner’s Guide

Aside from picking the TYPE of wire you want to start with, you’ll also need to get a few different GAUGES of wire, depending on the project. Most wire-wrapping projects use 14-26 gauge wire.

I started with 2 different gauges: 18 gauge and 24 gauge. I was able to make that work for me while I was learning.

Once you get the hang of it, you can start experimenting with other gauges.

QUICK TIP: The higher the number of the wire gauge, the smaller the wire. See chart below:

Wire Gauge Chart
Wire Gauge Chart
Photo Credit: CraftBistro
See More Wire

For more on wire, please see my blog post Beginner’s Guide to Jewelry Wire for Wire-Wrapping.

Beads

Now that you have your jewelry tools and some wire, you’ll need something to wrap.

If you are a beginner, the easiest way to start wrapping is using beads.

They’re super easy to wrap because they have holes through which you can feed the wire.

Gemstone beads are my personal favorite and you can find them in assorted strands on Etsy.

Photo Credit: TheBeadBandit
See More Gemstone Beads

Looking for simple wire-wrapping techniques?

Click here to see all PRINTABLE wire-wrapping tutorials

RELATED CONTENT

  • Wire Wrapping Tutorials: 17 DIY Wire-Wrapped Earrings
  • How to Use Liver of Sulfur as Copper Patina
  • Wire-Wrapped Ring Tutorials – How to Wire-Wrap Rings
  • Wire-Wrapping for Beginners
  • How to Make a Spiral Bead Cage Pendant

Other Supplies for Wire Wrapping Jewelry

These are items that you may need once you’ve started making wire jewelry, depending on the project.

Cabochons

A cabochon is a gemstone (or other material such as resin) which has been shaped and polished. They are not faceted – they have a smooth rounded top and a flat back.

They are more difficult to wrap (in comparison to beads) because they do not have holes. Cabochons are extremely popular in wire-wrapping.

They are available in many shapes and sizes.

BONUS TIP: Square and marquise shapes can be tricker to wrap.

You can find cabochons made from different materials – my favorites are gemstone cabochons, specifically Labradorite cabochons.

Photo Credit: earthstonesrocks
See More Cabochons

Don’t forget to check out my other blog post for more wire-wrapping resources => Wire-Wrapping for Beginners

Necklace Cord

If you plan on making any wire-wrapped pendants, you’ll need something to use as a necklace.

You can find cord in various materials and you can even find some that are pre-assembled with a clasp – easy peasy!

Photo Credit: AlwaysBestQuality
See More Necklace Cord

Nylon Jaw Pliers

Nylon jaw pliers are different than standard pliers – the heads are made of nylon and they come in different shapes.

They are primarily used for straightening or flattening wire (sometimes there are kinks in wire).

They are also used for making spirals without marring your wire.

Available on Etsy right here

Photo Credit: PrestigeTools
See More Nylon Jaw Pliers

RELATED CONTENT

  • Wire-Wrapping for Beginners
  • Jewelry Making Classes on Creativebug (Plus So Much More!)
  • How to Make a Spiral Bead Cage Pendant
  • Wire-Wrapping Tutorials: 13 DIY Wire-Wrapped Pendants
  • Wire-Wrapped Ring Tutorials – How to Wire-Wrap Rings

Looking for simple wire-wrapping techniques?

Click here to see all PRINTABLE wire-wrapping tutorials

Bail Making Pliers / Step Pliers

Super handy tool for making different size loops with wire. Some have up to 6 barrels in different dizes.

I use mine all the time in my wire work and I also use it to make jump rings.

Photo Credit: ToolsNToolsUK
See More Bail Making Pliers

Flush Cutter

A flush cutter has a flat side which produces a smooth flat cut in your wire. Very useful for making your own jump rings.

Get it here => Xuron Flush Cutter

Photo Credit: JewelryTooling
See More Flush Cutters

Anvil or Steel Block

At some point in your wire work, you will need to do some hammering. You definitely don’t need a huge anvil, a small one does the trick.

Get it here => Mini Anvil Bench Block

Photo Credit: JewelryTooling
See More Anvils

Alternatively, you can use a mini bench block for hammering (instead of using an anvil).

Get it here => Mini Bench Block

Photo Credit: DaisyTreasures
See More Bench Blocks

Chasing Hammer

A chasing hammer is used to flatten and straighten wire.

It has two ends: one flat side to flatten and one round side to add interesting divots to wire.

Get it here => Chasing Hammer

Photo Credit: QFMarket
See More Chasing Hammers

Rubber Mallett

A rubber mallet is really nice to have on hand if you need to hammer the wire without marking the wire.

Get it here => Jeweler’s Rubber Mallet

Photo Credit: metalsupplychick
See More Rubber Mallets

Looking for simple wire-wrapping techniques?

Click here to see all PRINTABLE wire-wrapping tutorials

Set of files

Definitely good to have if you’re getting into wire-wrapping.

You’ll need these to file away any marks on your wire.

Photo Credit: PARUU2015
See More Files

Heavy-Duty Cutters

If your wire is too thick, you need something more “heavy duty” to cut it.

Photo Credit: EnchantingBeads
See More Heavy Duty Cutters

Don’t forget to check out my other blog post for more wire-wrapping resources => Wire-Wrapping for Beginners

Coiling Gizmo Tool

If you want to learn how to make heady wraps, this tool will save you a ton of time!!!

Quickly make wire coils – so much quicker than doing it by hand!

Photo Credit: Oneofakindstones
See More Coiling Gizmo Tools

Wire Gauge Tool

This is my new favorite gadget….it measures the gauge of wire – this comes in handy if you find a scrap piece of wire and you don’t know the gauge.

I use mine ALL THE TIME.

Get it here => Wire Gauge Tool

Photo Credit: tjswirewarehouse
See More Wire Gauge Tools

Liver of Sulphur

If you decide to work with bare copper wire, you’ll need liver of sulfur to achieve the “antique” look. I use it on everything I make.

Get it here => Liver of Sulphur Gel 1 oz bottle

Photo Credit: FDJtools
See More Liver of Sulfur

Looking for simple wire-wrapping techniques?

Click here to see all PRINTABLE wire-wrapping tutorials

Steel Wool #0000

This extra fine steel wool is used to remove oxidation and/or patina from bare copper wire.

Get it here => Steel Wool #0000

Photo Credit: metalstop
See More Steel Wool

RELATED CONTENT

  • Wire-Wrapping Tutorials: 13 DIY Wire-Wrapped Pendants
  • Wire-Wrapping Tutorial DIY Jewelry Kits on Etsy
  • Wire-Wrapped Ring Tutorials – How to Wire-Wrap Rings
  • Wire-Wrapping for Beginners
  • How to Make a Spiral Bead Cage Pendant

Stuff to get down the road

If you get serious about wire-wrapping, you may want to invest into more tools and/or resources.

Lortone Tumbler

Such an invaluable tool – the Lortone tumbler does an EXTRAORDINARY job in polishing all your jewelry. Comes out AMAZINGLY shiny! (if used with stainless steel shot and burnishing compound)

I can’t say enough about my Lortone tumbler. I absolutely LOVE it and definitely could not do without one!

I started with this exact model and I still use it 3 years later.

Get it here => Lortone 45C Rotary Tumbler

See More Details

Stainless Steel Shot

Stainless steel shot is used as the tumbling media (it goes inside the tumbler).

I don’t recommend using regular steel shot because it will rust and it never does a good job in the tumbler.

Yes stainless steel shot is more expensive but you won’t have to worry about rusting and the results are far superior.

Get it here => 2 Lb Stainless Steel Shot – Jeweler’s Mix

See More Details

ShineBrite Burnishing Compound

I’m picky about the shot I use (stainless steel only) and I’m just as picky in regards to the burnishing compound that I use.

ShineBrite (along with stainless steel shot) produces AMAZING results – I tumble all my pieces and I’m constantly in awe of the “shiny-ness”.

TIDBIT: Some people use Ivory soap in the tumbler….. I have tried this and I don’t like the results at all. I just can’t seem to get it to work for me.

I definitely recommend ShineBrite for ULTIMATE shine 🙂

Get it here => ShineBrite Burnishing Compound

See More Details

Books

I love to learn online but I also love my books. I personally own both of these books – they were a huge help for me and I still refer to them from time to time.

TIMELESS WIRE-WEAVING: THE COMPLETE COURSE

Timeless Wire Weaving focuses on developing wirework skills through 13 projects using three classic wire weaving techniques: coiling, wrapping, and weaving. 

Get it here => Timeless Wire Weaving: The Complete Course

See More Details

INVENTIVE WIRE WEAVING

20+ Unique Jewelry Designs focuses on the timeless techniques of wire weaving, wrapping, coiling, and capturing, plus texturing metals and wire.

Get it here => Inventive Wire Weaving

See More Details

Want to Support me?

If you enjoyed my content, please consider leaving me a tip in my tip jar :). This helps me to create more amazing free content to share with you 🙂

If you’d like to see my work and follow my wire journey, you can find me here:

Etsy
Facebook
Instagram
Twitter
Pinterest
YouTube

Filed Under: Tutorials/DIY

Primary Sidebar

Hey there! Thanks for visiting 🙂

My name is Chantal and I’m the owner of Studio 73 Designs.

If you enjoy my content, you can support me here 🙂 Cheers!

Follow Me

  • Facebook
  • Instagram
  • Pinterest
  • Twitter
  • YouTube
Wire Wrapping Tutorials
Wire Wrapping for Beginners Start Here
Beginner's Guide to Jewelry Wire for Wire-Wrapping
Wire Wrapping Tools and Supplies for Beginners
How to wire wrap stones without holes wire-wrapping tutorial for beginners
Wire Wrapping Tutorials DIY Jewelry Kits

Footer

Are you interested in wire-wrapping?

Sign up below and get access to my FREE wire-wrapping guides!

    Built with ConvertKit

    Site Navigation

    Home
    About
    Contact
    Blog
    Privacy Policy
    Disclaimer
    Terms & Conditions

    Follow Me

    • Facebook
    • Instagram
    • Pinterest
    • Twitter
    • YouTube

    © 2023 · Studio 73 Designs · Designed by yours truly · Built on the Genesis Framework