Hi my lovely wire wrappers!
I’m back with a beautiful pendant piece for you to create.
If you have a precious crystal point stone in your possession, I believe my Wire-Wrapping Crystal Tower Point Pendant will hold it gracefully around your neck.
Follow me in my easy to follow step-by-step tutorial here!
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Best part about this tutorial is that no soldering required and beginner friendly.
LEVEL: BEGINNER
MATERIALS + TOOLS
- Crystal Point
- Silver Copper Wire (20 Gauge): Length (23 Inches)
- Brown Copper Wire (22 Gauge)
- Wire Cutter
- Nylon jaw pliers
- Stepped Bail-Making Pliers
- Round Nose Pliers
- Bent Nose Pliers
- Long Flat Nose Pliers
- Finest Steel Wire Wool
- Masking Tape
- Pen/Marker Pen
Prefer this wire-wrapping tutorial in a PRINTABLE FORMAT? (High Resolution Photos)
Click here for the PDF version of “Crystal Tower Point Wire-Wrapping Tutorial”
WIRE-WRAPPING CRYSTAL TOWER POINT TUTORIALS
Step 1 of 9
Firstly, measure your crystal point stone and take note of its length (fig. 1a).
Then, cut 23 inches length of 20-gauge silver coated copper wire and bend it in half (fig. 1b, 1c).
We start the framing process by making a circular bail at the middle with a stepped bail-making pliers as shown (fig. 1d, 1e).
Next, cross the wires and tape them in position with a masking tape as shown (fig. 1f, 1g).
Step 2 of 9
Prefer this wire-wrapping tutorial in a PRINTABLE FORMAT? (High Resolution Photos)
Click here for the PDF version of “Crystal Tower Point Wire-Wrapping Tutorial”
Secondly, make a 90-degree bend to the right (fig. 2a) on the wire at base of the crystal tip with a bend nose pliers.
Then, wrap the wire along the base (fig. 2b, 2c) and make another 90-degree bend upwards at the midpoint (fig. 2d, 2e).
You can cross-check with the circular bail as shown (fig. 2f).
Repeat the process on the other side (fig. 2g, 2h, 2i, 2j, 2k, 2l).
