Step 9 of 13
Next, place your round flatback unakite stone inside your pendant frame and tape it in place (fig. 9a, 9b, 9c).
On the back side, design the back stone holder frame with the remaining loose 20-gauge silver copper wires (fig. 9d).
Use the right most wire to form a inward spiral frame and curl the wire end (fig. 9e, 9f).
FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Then, use the inner right wire to expand the spiral frame outwards and curl the wire end (fig. 9g, 9h, 9i, 9j, 9k).
Prefer this wire-wrapping tutorial in a PRINTABLE FORMAT? (High Resolution Photos)
Click here for the PDF version of “Wire-Wrapping Spiral Unakite Stone Silver Leaf Pendant Tutorial”
Step 10 of 13
After that, twist the remaining two loose 20-gauge silver copper wires into a wire rope (fig. 10a, 10b, 10c).
Then, form the back holder frame with the wire rope (fig. 10d).
Take a new 26-gauge silver copper wire and make sectional coils to tighten the back wire spiral design (fig. 10e, 10f, 10g).
Step 11 of 13
Continue on, let’s create a spiral design for the pendant front (fig. 11a).
Spread out the 3 remaining loose 20-gauge silver copper wires (fig. 11b, 11c).
Use the right wire to form an inward wire spiral, and coil it with a new 26-gauge silver copper wire (fig. 11d, 11e, 11f).
Create a secondary naked wire spiral using the middle loose 20-gauge silver copper wire (fig. 11g, 11h).
