Wire-Wrapping Single Wire Citrine Tumbled Stone Cage Pendant Tutorial

Step 4 of 11

Moving on, curve the remaining straight 18-gauge silver wires inwards (fig. 4a, 4b).

Then, pull the wires through the space under the wire bail (fig. 4c, 4d).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL! 

JOIN NEWSLETTER

SEND GUIDE TO EMAIL

We respect your privacy. Unsubscribe at anytime.

Step 5 of 11

Pull the loose 18-gauge silver copper wires into a V-shape line (fig. 5a).

Then, wrap the left loose wire along the bottom and up the back (fig. 5b, 5c).

Repeat on the opposite wire (fig. 5d, 5e).

On the back side, make a cross with the loose wires (fig. 5f, 5g).

Step 6 of 11

Face the front side, and then wrap the top right loose 18-gauge silver wire around the bail neck (fig. 6a, 6b, 6c).

After that, slip the same wire through the center parting of the wire frame and pull it to the left direction (fig. 6d, 6e).

Step 7 of 11

Continue wrapping the same loose wire along the bottom of your tumbled stone (fig. 7a, 7b).

Slip it under the bottom right wire frame (fig. 7c, 7d).

Lastly, curl the loose wire along the right side of your stone, and end with a wire swirl using a round nose pliers (fig. 7e, 7f, 7g).