Step 11 of 22
Pull the loose silver weaved wire to the back of the big gold loop (fig. 11a, 11b, 11c, 11d).
Then, undo the weave of the silver weaved wire until you meet the loop intersecting point as shown (fig. 11e, 11f).
Tape the frame in place (fig. 11g).

FREE WIRE-WRAPPING GUIDE TO YOUR EMAIL!
JOIN NEWSLETTER
We respect your privacy. Unsubscribe at anytime.
Prefer this wire-wrapping tutorial in a PRINTABLE FORMAT? (High Resolution Photos)
Step 12 of 22
Next, let’s add curly design inside the big loop frames.
Bend one of the exposed 18-gauge silver copper wire to the front (fig. 12a, 12b).
Slip it in between the big gold loop frame (fig. 12c, 12d).
Then, use a stepped bail-making pliers to make a loose curl design on the 18-gauge silver wire as shown (fig. 12e, 12f, 12g).
Step 13 of 22
Repeat the bending and curling process for the other remaining three loose 18-gauge wires (fig. 13a):
- Second silver copper wire (fig. 13b, 13c, 13d).
- Third silver copper wire (fig. 13e, 13f, 13g, 13h).
- Gold copper wire (fig. 13i, 13j, 13k, 13l).



























